Brand: CHFIRE
Type: Indoor Fire Hydrant Landing Valve
Material: Material
Inlet: 3" BSPT
Outlet: 2.5" BS336
Working pressure:16bar
Color: Red
Standard: CE certificate.
Fire Fighting Fire Hose Landing Valve for Fire Hydrant System Using In South AfricaSpecification
South Africa Fire Hose Landing Valve for Fire Hydrant System | |
Material | Brass |
Inlet Size | 3iinch BSPT |
Outlet Size | 2.5inch British Instananeous |
Working Pressure | 16bar |
CHFIRE FIRE FIGHTING EQUIPMENT
A filter must be installed before the 500X pressure relief valve and the pressure holding valve. When adjusting, the screw on the pilot valve should be withdrawn, the water pump should be started to discharge from the pressure relief valve, and the adjusting screw should be gradually screwed in to gradually increase the pressure until the required set pressure is reached. Tighten the nut after adjustment.
PHP is an independent proportioning and mixing system that automatically adjusts according to flow and pressure. It is usually installed near the foam tank and connected to the foam tank, fire pressure water source and foam generating equipment through pipes. When a fire occurs, the foam pump starts to suck the foam from the foam tank into the proportioning mixer pipe. After being adjusted by the pressure balance valve and the proportioning mixer, a certain amount of foam is injected into the pressure water flowing through the proportioning mixer and forms a concentrate, which then flows to the foam generating equipment, such as foam guns, foam cannons, etc., and finally produces foam fire extinguishing.
The foam proportioning device is suitable for oil tank areas and refineries, petrochemical enterprises, hangars, port areas, cargo storage yards, warehouses, gas stations, paint storage areas, etc.
In firefighting, two way inlet dividing water breeching play a vital role. They are not only a key component in firefighting equipment, but also an important guarantee for firefighters to perform their tasks safely and efficiently. By deeply understanding the functions and usage of water distributors, we can better understand their indispensable role in firefighting.
Fire sprinkler is an important part of fire sprinkler system, which is mainly used to control and extinguish fire by spraying water when fire occurs. There are many types of fire sprinkler, each type has its specific application scenario and function.
The CHFIRE brand BS750 Fire hydrant is normally used by the fire service, it is made of ductile iron and brass according to BS 750.
French Type Fire Hose Reel is designed by NF EN671-1:2012 standard, it is hot selling in French Marketing.
The UL-FM water flow indicator is a component of the automatic sprinkler fire extinguishing system, which is generally installed on the water distribution main or the beginning of the water distribution pipe on the system network side. When the blade senses the water flow signal, it will convert the water flow signal into an electrical signal. After receiving the signal, the automatic alarm controller will issue a command pneumatic alarm system or start electrical equipment such as fire pumps, and can display the firearea. This product is suitable for wet, dryand pre-action automatic fire extinguishing systems.
CHFIRE 950LPM(250GPM) Pistol Grip Fire Nozzle is a Multi Purpose Fire Nozzles. With big flow rate of 950 LPM(250GPM), shall be a good help to extinguisher rapidly.
High pressure anodized aluminum 1inch, 1 1/2 inch, 2inch, 2 1/2inch NH pistol grip ball shut-off valve is lightweight and durable. Features a cast aluminum bale and durable polymer pistol grip that is easily removed. Pistol grip allows for stable and comfortable use. Valve has polymer ball and seating for reduced friction when opening and closing valve under pressure.May be used with any NH or NST threaded nozzle.
CH26-16 High Pressure Nozzle with Trigger Shutoff